Cabinetry
Interior
Cabinetry
T-STAR PLUS WAFER HEAD YELLOW ZINC
SPAX® T-STAR plus Wafer Head fasteners with yellow zinc coating are designed for use in multiple material connections. They are designed with a low profile large diameter wafer head which is ideal for installation of cabinetry or where a countersunk head is not desired.
Selection Details/breakdown
SKU #:
Where to buy
Please note that product availability may vary by location.
Shop Locally
Shop our Online Retailers
Design Values & Loads
ALLOWABLE WITHDRAWAL (W) AND HEAD PULL-THROUGH (WH)
- Tabulated withdrawal and head pull-through design values (W) and (WH) are shown at a CD = 1.0. Tabulated withdrawal and head pull-through values shall be adjusted by all applicable adjustment factors per NDS Table 11.3.1.
- Full withdrawal strength is calculated by multiplying the length of thread embedded in the main member by the tabulated reference withdrawal values.
- Head pull-through values for #8 diameter and larger in Southern Pine, Douglas-Fir, Hem-Fir and Spruce-Pine-Fir are minimum 1.5" side member thickness.
- For wood species with an assigned specific gravity between 0.42 and 0.50, use the tabulated values for specific gravity of 0.42. For wood species with an assigned specific gravity between 0.50 and 0.55, use the tabulated values for specific gravity of 0.50. For wood species with an assigned specific gravity greater than or equal to 0.55, use the tabulated values for specific gravity of 0.55.
CAD & Dimensional Drawings
Docs & Files
SPAX Wafer Head Yellow Zinc Cabinet Screws
Masonry & Concrete Pre-Drill Specifications
NOTE: In masonry/concrete, pre-drill a hole at least ¼" to ½" longer than the length of the screw (refer to chart). No anchor required. In sheet metal, no pre-drilling is required up to 24 gauge.
Screw Diameter | #8 | #10 | ||
Drill Bit | 1/8" | 5/32" | ||
Weight | Light | Medium | ||
SPAX engineered fasteners are the most advanced product on the market
Our fasteners strength and job site efficiency innovations will provide you with the power to keep your projects connected stronger for longer. Featuring SPAX® patented thread technology, they require no pre-drilling, and drive faster and easier than conventional lags and other structural lag screws.
Low profile wafer head
Provides a larger surface area and aesthetically clean look for the reliable installation of fine cabinetry.
Patented serrations
Allow for quicker, easier fastening.
Unique 4CUT™ Point
Prevents splitting and requires no pre-drilling in wood.
T-STAR plus drive
"The PRO's Choice" drive system provides superior bit engagement, eliminates camming out and facilitates overhead driving.
LEARN MORE ABOUT SPAX® MULTI-MATERIAL SCREWS
Featured Applications
VIEW ALLInterior
Request a Sample Pack
Examine our products up close before you buy. Just locate a SPAX seller near you or order online today.