Driving Innovation Into Every Connection
No matter the home project, SPAX® Engineered Fasteners help you drive with more strength, greater speed and lasting beauty. Amplify your craft with SPAX.
PowerLags® provide the highest strength ratings with SPAX® patented thread technology that requires no pre-drilling, meaning you can drive faster and easier. Our PowerLags are perfect for multi-ply lumber assemblies. In fact, we offer the largest selection of code-recognized, structural wood-to-wood screws for framing in the industry.
DrJ TER No. 1802-03
Our PowerLags® for uplift/truss rafter connections can increase on-the-job efficiency by replacing time-consuming hurricane clip installations. The T-STAR plus cylindrical head of our PowerLags countersinks fully to eliminate interference with drywall or other finish work, while the zinc coating offers the appropriate level of strength and corrosion protection for interior construction applications.
DrJ TER No. 1910-02
With superior hold and zero pre-drilling, our PowerLags® with HCR® coating provide corrosion resistance in engineered wood. Their low-profile, large-diameter head design provides outstanding clamping force, while the T-Star drive offers superior bit engagement without requiring a “special” driver bit.
DrJ TER No. 1802-03
SPAX® Multi-Material fasteners with HCR-X™ coating feature a low-profile, large-diameter wafer head for applications where you need additional surface area under the head for maximum pulldown force in a window installation. Finish the job with our PowerTrim™ fasteners with white HCR® coating. They’re ideal for use in both interior and exterior connection applications in wood, vinyl or PVC where you want a countersink for a clean-flush and near “hidden” finish.
- Application: Exterior
- Head: Wafer
- Coating: HRC-X
- Bit: T-STAR Plus
- Diameters: #8, #10
- Application: Exterior
- Head: TrimCylindric
- Coating: White HCR
- Bit: T-STAR Plus
- Diameters: #8
- Application: Exterior
- Head: TrimCylindric
- Coating: White HCR
- Bit: T-STAR Plus
- Diameters: #8
Replace traditional lag bolts to reduce effort, eliminate pre-drilling and build greater strength with SPAX® PowerLags®. Our hex washer head construction fasteners with HCR® coating are perfect for wood-to-wood connections in exterior structural applications where you’re attaching treated lumber components and want to achieve superior pull-down force. Use our low-profile, large-diameter washer head wood lag screws to achieve outstanding clamping force and improved aesthetics.
With durable yellow zinc and zinc indoor coatings, such as our zinc and yellow zinc options, our special purpose and construction screws are perfect for kitchen cabinet installations. The T-STAR plus trim head and serrated threads of our MDF/hardwood screw help eliminate the risk of splitting when assembling cabinet walls, while our multi-material T-STAR plus wafer head yellow zinc screw provides ample surface area for securely hanging cabinets.
Say goodbye to screws that back out of boards as lumber cures. No more squeaky subfloors with PowerDeck® stainless steel screws. Featuring our unique Double ThreadLok™ design, these fasteners will pull down and hold boards tight. Or use our multi-material HCR-X™ partial thread fasteners for treated lumber applications and a clean-flush finish.
A powerful galvanized exterior deck screw with proprietary HCR-X™ coating, the T-STAR plus flat head, partial thread screw is well-suited for overhead work and provides structural integrity and protection against rust and corrosion. The “workhorse” of construction fasteners, this multi-purpose screw will countersink in treated lumber for a clean-flush finish and provides quick and easy installation with a long-lasting, “contractor-proven” secure connection you can count on. And for ultimate corrosion resistance in coastal areas, choose our 301 stainless steel deck screws.
Do more with less. Our superior PowerLags® offer 15” on center spacing for a 20’ ledger board, which means you can use 50% fewer fasteners to get the job done. Plus our PowerLag wood-to-wood screws have the industry’s highest pull and shear ratings. Drive faster with no pre-drilling and benefit from low-torque, quick installation.
DrJ TER No. 1711-01
Skip the squeaks and backing-out screws. PowerDeck® fasteners offer maximum corrosion resistance, low-profile head and double threads for ultimate holding power to keep deck boards and stair treads secure as lumber dries out. Or choose our powerful galvanized exterior deck screw with proprietary HCR-X™ coating and partial thread — the fastener of choice for contractors working with treated lumber.
With its low-profile head, durable HCR® exterior coating and superior clamping force, PowerLag® washer head wood lag screws ensure maximum post stability while also providing improved aesthetics. Fast-driving and exhibiting superior pull-down force through their additional surface area under the head, these lag screws ensure some of the industry’s strongest wood-to-wood connections for treated lumber.
Multi-purpose Construction Screws are designed for a wide range of both interior and exterior applications in wood, concrete, masonry, sheet metal and plastic.
Deck and Construction Screws offer premium corrosion protection in treated lumber, cedar and redwood, as well as other exterior applications. Available in stainless steel and a variety of colors for use with composite decking.
Special Purpose Screws are designed for specific applications including cabinets, medium density fiberboard, hardwoods, rear panel attachment, finishing trim board attachement and exterior composite (PVC) fascia board attachment.
PowerLags® offer the perfect solution for structural exterior and interior wood-to-wood connections.
PowerLags® for Log Homes and Timber Frame Construction are engineered specifically for log and timber frame construction.
